The 500HD has a 20” blade, the blade has 4 working surfaces giving you 4 blade changes in one piece.
It also has the addition of a hydraulic hold down which will clamp the part being cut to prevent the material kicking up. The hold down arm can also be turned off easily, turning it back to a standard shear when more awkward pieces need to be cut. This makes it one of the most versatile shears in the range. The 120 ton shear force will make for easy cutting of most materials in the nonferrous department.
The 500HD comes with wheels as standard or can be floor mounted, it also has forklift pockets for easy handling. It is a 3 phase machine that is available in 220v or 480v 60Hz.
As with all of the McIntyre alligator shears, the stroke length is easily adjustable, reducing the height the blade travels and increasing the number of cuts per minute.
|Machine dimensions:||66.5” x 28” x 55”
|Blade Length:||508mm / 20”|
|Tip to tip opening:||8.9”|
|Weight with oil:||2178lbs|
|Oil capacity:||44 Gallon|
|Noise Level:||78 +/- 3dBA|
|Cut control:||Single Cut repeating|
|3ph / 220v or 480v / 60Hz|
|Motor speed:||1700 rpm|
|Max system Pressure:||3500 psi|
|Max Shear force:||120 Tons|
|Fully open cut speed:||8 dry cycle cuts per min
|40% Stroke cut speed:||21 dry cycle cuts per min|
|Cutting Capacity:||56mm (2.25”) (Round Bar)
45mm (1.75”) (Square Bar)
While we make every effort to ensure that our information is correct, technical data is for guidance only and subject to change. If any dimension or performance indication is important to you, please check with us before ordering.