- Vehicle Drainage
- Vehicle Processing Accessories >
- Cat Processing Equipment
- Engine Processing
- Alligator Shears
- Balers & Crushers
- Cable Processing Equipment >
- Container Loaders
600 LGT Radiator & Cat Shear
An extended blade length has been designed for the fast and effective cleaning of car radiators. The 600 RAD has enough shear force to deal with a wide range of operations and materials including cleaning whole gearboxes, cylinder heads and blocks, over-sized gate valves and all non-ferrous materials.
It is also used extensively for cropping ferrous materials where the longer blade length is an advantage. The 600 LGT Shear can also be fitted with an optional catalytic converter bracket which can be used to recover valuable precious metals from waste catalytic converters.
The 600 LGT Features a blade guard system which is simple to use and allows good visibility to the operator. Although wheels have been fitted as standard, forklift points have also been included on the body of the machine to allow movement of the shear both within the yard and during transportation.
The cutting blades of the 600LGT can cut on all four edges this means the blades can be removed and rotated, then refitted to expose each edge in turn before the blade needs to be replaced. The blades are deep hardened for an extended life.
Both single and 3 phase versions are available.
70.1/2" x 28" x 56.3/4" (1790mm x 712mm x 1443mm)
|Blade Length||23.9" (608mm)|
|Tip to Top Opening||10.4" (264mm)|
|Shearing Height||36.3/4" (934mm)|
|Weight with Oil||2,266lbs (1030kg)|
|Oil Capacity||44 Gallons (200Litres)|
|Noise level||78dBA +/- 3 dBA|
|Cut Control||Single Cut - Repeating|
|Electrical||32amp 3phz 480v 60hz|
|Power Rating||10hp (7.5 KW)|
|Max Hydraulic Pressure||3500 PSI (2412 Bar )|
|Max Shear Force||120 tons|
|Dry Cycle speed Fully open||8 Cycles per minute|
|Dry Cycle speed 40% open||21 Cycles per minute|
|Max Cutting Capacity Round||2.1/4" (56mm)|
|Max Cutting Capacity Square||1.3/4" (45mm)|