- Vehicle Drainage
- Vehicle Processing Accessories >
- Cat Processing Equipment
- Engine Processing
- Alligator Shears
- Balers & Crushers
- Cable Processing Equipment >
- Container Loaders
The McIntyre 200B Alligator Shear is equipped with an 8" blade, the high shear force and wide tip to tip opening means that the McIntyre 200 alligator shear can deal efficiently with a whole range of non-ferrous cleaning and sizing operations - in particular, larger diameter electric cables and valves. In most cases, if your metal fits in to the jaw of the 200 then it will cut it.
The blades can cut on all four edges, allowing the blades to be removed, turned and refitted to expose each edge in turn before the blades need replacing.
A simple foot pedal operation closes the jaws, when released the jaws return to the open position, increasing operator safety. A manual hold down clamp is fitted to prevent kick back of the material and maintain a safe distance between the operator and the cutting blades.
There are a wide range of 200B models to choose from, Either bench mounted or on a wheeled stand, single phase or three phase power, the choice is yours.
|Machine dimensions:||55''x 27''x 56''|
|Tip to tip opening:||6''|
|Weight with oil:||925 lbs|
|Oil capacity:||13.5 Gallons|
|Noise level:||75 dBA +/-3|
|Cut control:||Single cut repeating|
|Standard electrics:||3ph 480v|
|Max system pressure:||3200psi|
|Max shear force:||52 Tons|
|Cut speed - fully open:||8 Dry cuts per minute|
|Cut speed - 40% open:||21 Dry cuts per minute|
|Cutting capacity - mild steel||1.5'' round bar, 1.25'' Square bar|
Whilst we make every effort to ensure that our information is correct, technical data is for guidance only and subject to change. If any dimension or performance indication is particularly important to you, please check it with us before ordering.