- Vehicle Drainage
- Vehicle Processing Accessories >
- Cat Processing Equipment
- Engine & Wheel Processing
- Shears >
- Balers & Crushers
- Cable Processing Equipment >
- Container Loaders
- Case Studies
The McIntyre 320 Alligator Shear has a 12½" Blade and is recognized as the industry standard for all shears of its class, the 320 is powerful enough to deal with a wide range of operation including the cleaning of automotive aluminium scrap, whole gear-boxes, cylinder heads and blocks, over-sized gate valves and handling all nonferrous separations.
The established 320 Shear is a must for any yard and is now recognized as the industry standard for all shears of this type.
One of our most popular shears, the 320 has maintained dominance in a demanding market due to its strength, quality and reliability.
The 320 is powerful enough to deal with a wide range of cutting and cleaning operations and is able to handle; automotive scrap, whole gear boxes, cylinder heads and blocks, oversized gate valves and of course all the usual non ferrous metal separations. The 320 can also be used to cut ferrous metals.
As well as being a quality product in itself, the 320 is cheap to run and maintain. Its blades, for example, cut on all four edges so can be removed, rotated 180 degrees and re-fitted to expose each edge in turn before needing to be replaced.
Opening and closing of the jaw is controlled by a moveable foot pedal. A continuous cutting action is achieved by keeping constant pressure on the pedal. The cutting blades return immediately to the open position when pressure is released, increasing operator safety. A manual hold down clamp prevents kick back of material and maintains a safe distance between the operator and the shear blades. Both single and three phase versions are available.
|Machine dimensions:||1460 x 712 x 1322m|
|Blade length:||320mm / 12.5|
|Tip to tip opening:||165mm / 6.5"|
|Shearing height:||910mm / 35.8"|
|Weight with oil:||680kg|
|Oil capacity:||200 Liters / 44 Gallon|
|Noise level:||75 +/- 3dBA|
|Cut control:||Single Cut - repeating|
|Standard electrics:||32A / 3ph /380-415v / 60Hz|
|Power rating:||7.5 kW / 10hp|
|Motor speed:||1450 rpm|
|Max system pressure:||172 Bar / 2500 psi|
|Max shear force:||67 Tons|
|Cut speed - fully open:||16 cuts/min (dry cycle)|
|Cut speed - 40% open:||41 cuts/min (dry cycle)|
|Cutting capacity-mild steel:||50mm (2") round bar, 40mm (1.5") square bar|
Whilst we make every effort to ensure that our information is correct, technical data is for guidance only and subject to change. If any dimension or performance indication is particularly important to you, please check it with us before ordering.